Control Panel Will Not Operate Launcher

Control Panel Will Not Operate Launcher

Possible Cause#1
Damage to control panel and components

Solution Set#1
  1. Replace the control panel



    • Related Articles

    • Control Panel Broken Shield

      Possible Cause#1 Damage to control panel and components Solution Set#1 Replace the control panel
    • Control Panel Lights Not Illuminated

      Possible Cause#1 No power to control panel Solution Set#1 Check control panel power fuse Check ignition fuse Possible Cause#2 Water damage to control panel and components Solution Set#2 Replace the control panel
    • Rounds Not Reporting In Launcher

      Possible Cause#1 Not properly seated Solution Set#1 Confirm that rounds are seated properly Arm system and check to see if rounds come up on mapping Replace rounds Possible Cause#2 Battery dead Solution Set#2 Replace round  Possible Cause#3 No ...
    • Launcher Fails To Arm; No Laser With System On

      Possible Cause#1 Control Panel Connections Solution Set#1 Verify Ignition power Verify 12V and ground connections Ensure Can-Bus Harness is connected ...
    • No Compressor Or Launcher Control, Laser works

      Possible Cause#1 Defective PCM/PCR, fuse, wiring Solution Set#1 Check all power fuses Power up system put in training mode Check for movement of the launcher and/or compressor operation Check all connections and wiring Check power from ...