Possible Cause#1 Possible bad PCM/PCR Solution Set#1 Check all power fuses Power up system put in training mode Check for movement of the launcher and/or compressor operation Check all connections and wiring Check power from PCR-including ...
Possible Cause#1 Lost memory in stepper Solution Set#1 Put system in training mode and hard park it See StarChase V3.0 Launcher Park Reset Instructions Possible Cause#2 Laser needs re-aimed Solution Set#2 Follow laser aiming instructions See ...
Possible Cause#1 No power to PCM/PCR Solution Set#1 Check 12V power to PCM/PCR Check ground to PCM/PCR Check 5VDC to PCM/PCR Replace 15A fuse for PCM/PCR Possible Cause#2 No power to control panel Solution Set#2 Check 12VDC power to control panel ...
Possible Cause#1 No power to Computer Box Solution Set#1 Check fuse for PCM/PCR, replace if bad Check for movement of the launcher and/or compressor operation Check all connections and wiring Check power from PCM/PCR-including disconnecting grey ...