Launcher Elevated Up, Door Won't Unlatch

Launcher Elevated Up, Door Won't Unlatch

Possible Cause#1
Loose wiring

Solution Set#1
  1. Check orange wire that runs from control panel to computer box
  2. Complete tug test to ensure wire is secure
  3. Replace wire by pulling the metal retaining tang upward and push the wire back into the connector housing

    • Related Articles

    • Launcher Door Not Securing

      Possible Cause#1 Door heater damaged Solution Set#1  Inspect Door for heater damage Confirm launcher equipped with Quick Release Heaters (QRH) If equipped with QRH, replace heater. See StarChase QR Heaters Installation Manual in attachments If not ...

    • Launcher Barrel Corrosion

      Possible Cause#1 Water intrusion Solution Set#1 Replace launcher

    • Launcher No Elevation

      Possible Cause#1 Broken stepper  Solution Set#1 Replace launcher

    • Adhesive In Launcher

      Possible Cause#1 Adhesive stuck to heater coils  Solution Set#1 Clean off heater coils If applicable replace heaters (check serial number in serial tracking for QR heaters) Replace launcher Possible Cause#2 Round came unseated Solution Set#2 Clean ...

    • Launcher Not Moving

      Possible Cause#1 No power to launcher Solution Set#1 Check PCM/PCR fused power from battery; 15A fuse blown replace Check 12V power to PCM/PCR Check ground to PCM/PCR Check 5VDC to PCM/PCR Replace PCM/PCR if 12VDC is not present on output connector ...