Round Will Not Stay Seated In Barrel

• Related Articles

• Round Stuck In Barrel

  Possible Cause#1 Melted adhesive Solution Set#1 Remove excess adhesive from barrel using small amount of WD-40 on a rag to wipe launcher barrel (DO NOT SPRAY WD-40 INTO BARREL) If other barrel currently has a round loaded, remove from launcher ...

• Rounds Not Reporting In Launcher

  Possible Cause#1 Not properly seated Solution Set#1 Confirm that rounds are seated properly Arm system and check to see if rounds come up on mapping Replace rounds Possible Cause#2 Battery dead Solution Set#2 Replace round  Possible Cause#3 No ...

• When Loaded Training Round Will Not Show Up On The Control Panel

  Possible Cause#1 The round may not be seated properly Solution Set#1 Remove the round completely and reseat

• Rounds Not Deploying Properly

  Possible Cause#1 Screws loose on Door Cover Solution Set#1 Check and tighten screws on Door  Possible Cause#2 Round flips after being deployed      Solution Set#2 Round hit door during deployment Officer did "hard braking" during deployment  ...

• Rounds Not Reporting In Mapping Website

  Possible Cause#1 GPS rounds faulty Solution Set#1 Confirm PST lights on Control Panel are lit Confirm vehicle is parked in clear view to ensure unobstructed view to satellite Drive vehicle to see if satellite will lock in (may take up to an hour if ...