Related Articles
Round Stuck In Barrel
Possible Cause#1 Melted adhesive Solution Set#1 Remove excess adhesive from barrel using small amount of WD-40 on a rag to wipe launcher barrel (DO NOT SPRAY WD-40 INTO BARREL) If other barrel currently has a round loaded, remove from launcher ...
Round Will Not Stay Seated In Barrel
Possible Cause#1 Round not seated correctly Solution Set#1 Replace round Possible Cause#2 Round will not remain seated in barrel Solution Set#2 Check detents of launcher barrel Possible Cause#3 Bad detents in barrel Solution Set#3 Replace launcher
When Loaded Training Round Will Not Show Up On The Control Panel
Possible Cause#1 The round may not be seated properly Solution Set#1 Remove the round completely and reseat
Launcher Barrel Corrosion
Possible Cause#1 Water intrusion Solution Set#1 Replace launcher
Rounds Not Deploying Properly
Possible Cause#1 Screws loose on Door Cover Solution Set#1 Check and tighten screws on Door Possible Cause#2 Round flips after being deployed Solution Set#2 Round hit door during deployment Officer did "hard braking" during deployment ...