When Loaded Training Round Will Not Show Up On The Control Panel
Possible Cause#1
The round may not be seated properly
Solution Set#1
Remove the round completely and reseat
Related Articles
Control Panel Will Not Operate Launcher
Possible Cause#1 Damage to control panel and components Solution Set#1 Replace the control panel
Control Panel Broken Shield
Possible Cause#1 Damage to control panel and components Solution Set#1 Replace the control panel
Round Will Not Stay Seated In Barrel
Possible Cause#1 Round not seated correctly Solution Set#1 Replace round Possible Cause#2 Round will not remain seated in barrel Solution Set#2 Check detents of launcher barrel Possible Cause#3 Bad detents in barrel Solution Set#3 Replace launcher
Control Panel Lights Not Illuminated
Possible Cause#1 No power to control panel Solution Set#1 Check control panel power fuse Check ignition fuse Possible Cause#2 Water damage to control panel and components Solution Set#2 Replace the control panel
Control Panel Chattering/Making Noise
Possible Cause#1 Wiring of Control Panel Solution Set#1 Check ignition wire connected correctly Check 5V sense wire is connected correctly Possible Cause#2 Damage to control panel and components Solution Set#2 Replace the control panel