Related Articles
Launcher Is Cycling Elevation Constantly
Possible Cause#1 Possible bad PCM/PCR Solution Set#1 Check all power fuses Power up system put in training mode Check for movement of the launcher and/or compressor operation Check all connections and wiring Check power from PCR-including ...
No Fire In Training Mode, No Launcher Elevation, CP and Laser On, Pressure Good
Possible Cause#1 Bad CB, PCM/PCR, or 12V connection to PCM/PCR Solution Set#1 Check for 12V going into PCM/PCR. If no 12V check fuse for PCM/PCR. If 12V present proceed to next step Check for 12V at orange wire on 4 Pin connector. If no 12V replace ...
Intermittent Elevation
Possible Cause#1 Console was wired backwards/incorrectly Solution Set#1 Failed to hard park when in training mode (all connections flowed with the movement of the Launcher so nothing was preventing it from moving) System blew the 20 amp fuse to the ...
System Locked-No Elevation, No Laser
Possible Cause#1 No power to Computer Box Solution Set#1 Check fuse for PCM/PCR, replace if bad Check for movement of the launcher and/or compressor operation Check all connections and wiring Check power from PCM/PCR-including disconnecting grey ...
Launcher Barrel Corrosion
Possible Cause#1 Water intrusion Solution Set#1 Replace launcher